Dismantling Pools
To drain your pool, follow the steps below:
- Unscrew the cap from the drain valve located on outside wall of the pool.
- Connect the adaptor to the garden hose.
- Place the other end of the hose in an area where the water can be safely drained.
- Screw the hose adapter to open the drain valve. Note: water will start to drain immediately.
- Disconnect hose and adapter when finished.
- Replace drain cap on the outside of the pool.
Make sure the pool liner is completely dry before storing for a long period of time.
The pool must be thoroughly cleaned with a mild soap and water solution and carefully rinsed to completely remove soap suds and dirty residue. Make sure the pool is completely dry before storing it. Fold the pool liner only if the environment temperature is above 10ºC / 50ºF. Store the pool in a dry place with a moderate temperature between 10ºC / 50ºF and 38ºC / 100ºF and position the pool liner and all accessories inside a carton box, to better protect the PVC material during the colder months.
We suggest completely deflating the top ring and discharging the rest of the water, or you can buy a drain pump to complete this operation.
Bestway Hydrium Pools are built without a drain valve. To drain the water from your pool, follow the instructions and corresponding diagrams below:
• Insert the hose into the water until it is completely submerged.
• Cover one end with your hand to keep the water inside.
• Take out the hose, keeping your hand over the end.
• Place the hose in the designated draining area, removing your hand to let the water flow.
• The water will begin to drain automatically.
Bestway Hydrium Pools are built without a drain valve. To drain the water from your pool, follow the instructions and corresponding diagrams below:
1. Insert the hose into the water until it is completely submerged. 2. Cover one end with your hand to keep the water inside. 3. Take out the hose, keeping your hand over the end. 4. Place the hose in the designated draining area, removing your hand to let the water flow. 5. The water will begin to drain automatically.
Please follow below steps to drain Power Steel Comfort Jet oval pools:
1. Unscrew the cap from the drain valve located on the outside wall of the pool.
2. Connect the adaptor to the garden hose.
3. Place the other end of the hose in an area where the water can be safely drained.
4. Screw the hose adapter to open the drain valve.
Note: water will start to drain immediately.
5. Disconnect the hose and adapter when finished.
6. Replace drain cap on the outside of the pool.
7. Make sure the pool liner is completely dry before storing for a long period of time.
With the help of a little wooden stick and some talcum powder, the liner can be separated from the top rails. As recommend in the user manual, to avoid this situation in future seasons, customers can apply some talcum to the top rails before installation.